KISEI SHOJI LLC.

DEWATERING SERIES

Multi-disc Screw Press Sludge Dewatering System
NTD series

Screw Sludge Dewatering Machine

Continuous sludge dewatering equipment with low-speed drive and self-cleaning structure.

Reference DS processing capacity: 5 to 640 kg-DS/h, 16 models in total. Select the model by checking the sludge properties and chemical injection conditions.

Multi-disc Screw Press Sludge Dewatering System Product appearance of NTD series
Product appearance
Multi-disc Screw Press Sludge Dewatering System side and control panel
side/control panel side
Multi-disc Screw Press Sludge Dewatering System drive side
Drive side
Multi-disc Screw Press Sludge Dewatering System rear side
Back side
1 / 4
PRODUCT OVERVIEW

Product overview

Continuous processing from concentration to compression dewatering

The NTD series combines a screw shaft with a filtration section made of alternating fixed and moving rings. Free water is separated in the first section, followed by compression using back pressure at the outlet. Model selection must account for the sludge characteristics and flocculation conditions.

16 modelNTD131~NTD404
5~640Reference DS processing capacity kg-DS/h
0.36~9.00Total power kW

processing capacity is a reference value for model selection. The classification of low concentration and high concentration and application conditions will be announced individually based on the properties of the target sludge.

PROCESS & STRUCTURE

multi-disc screw press mechanism

Raw sludge is coagulated and mixed, concentrated and compressed using a stacking ring and screw. The following is a schematic diagram showing the processing route, and is not a drawing showing the piping or structure of the actual machine.

Roles of main components

Fixed ring
Forms filtration gaps and retains solids.
Floating ring
action prevents clogging of filtration gaps.
screw shaft
Transports the sludge to the outlet side and transfers it from concentration to compression.
Back pressure plate
Used for pressure adjustment on the outlet side. Settings vary depending on sludge conditions.

FEATURES

Features of equipment

Self-cleaning structure

The relative movement of the fixed ring and floating ring prevents clogging of the filtration gap.

Low speed drive

Total power is 0.36~9.00 kW depending on the model. Actual power consumption varies depending on operating conditions.

Continuous automatic operation

Compatible with PLC control and automatic cleaning operation. Check the operating conditions and surrounding equipment.

Integrated configuration

You can consider a configuration that combines flocculation, concentration, compression, and filtrate recovery.

Maintainability

The standard daily maintenance is 10 minutes/day. The required work and time vary depending on the sludge condition, cleaning conditions, and usage environment.

SPECIFICATIONS

NTD series Compare all 16 models

First, check the candidates based on DS processing capacity and device dimensions, and if necessary, refer to detailed specifications for each model. The classification of low concentration and high concentration is confirmed individually according to the target of treatment.

Showing 16 models

modelDS ability at low concentration
kg-DS/h
DS ability at high concentration
kg-DS/h
total power
kW
External dimensions L×W×H
mm
specificationscomparison
NTD1315100.361,778×892×1,160
NTD13210200.541,920×970×1,220
NTD25115300.922,550×880×1,550
NTD25230601.472,670×1,095×1,550
NTD30130601.303,140×1,000×1,610
NTD302601202.053,280×1,295×1,610
NTD303901803.003,501×1,640×1,690
NTD3041202403.753,840×2,045×1,730
NTD351501001.853,520×1,065×1,830
NTD3521002002.953,720×1,395×1,830
NTD3531503004.404,040×1,770×1,875
NTD3542004005.904,240×2,230×1,880
NTD401801603.004,470×1,225×2,225
NTD4021603204.504,820×1,680×2,250
NTD4032404807.504,720×2,515×2,230
NTD4043206409.004,760×3,120×2,230

External dimensions may change depending on specifications and manufacturing conditions. Official dimensions will be determined at the time of quotation and drawing confirmation.

Detailed model specifications

If you select "Details" in the quick reference table, the specifications by model will be displayed here. Numerical values ​​for all models can also be confirmed from the detailed specification table below.

Compare up to 3 models

If you check "Compare" in the quick reference table, a comparison table will be created from the same specification data. There is no automatic judgment of superiority or inferiority.

Please select the model to compare.

Reference supply flow rate by solid content concentration

Supply flow rate is a reference value for model selection. Check the applicable conditions for the target sludge and make a selection. We do not guarantee that all sludge will be processed according to the listed values.

NTD model10,000 mg/L
m³/h
20,000 mg/L
m³/h
25,000 mg/L
m³/h
50,000 mg/L
m³/h
NTD1310.500.500.400.20
NTD1321.001.000.800.40
NTD2511.501.501.200.60
NTD2523.003.002.401.20
NTD3013.003.002.401.20
NTD3026.006.004.802.40
NTD3039.009.007.203.60
NTD304Individual consultationIndividual consultationIndividual consultationIndividual consultation
NTD3515.005.004.002.00
NTD35210.0010.008.004.00
NTD35315.0015.0012.006.00
NTD354Individual consultationIndividual consultationIndividual consultationIndividual consultation
NTD4018.008.006.403.20
NTD40216.0016.0012.806.40
NTD40324.0024.0019.209.60
NTD40432.0032.0025.6012.80

Please consult us individually regarding the supply flow rate of NTD304 and NTD354. Supply conditions other than the listed concentrations will be determined by checking the sludge properties and operating conditions.

Processing capacity and supply flow rate listed are reference values. Actual treatment capacity varies depending on sludge properties, solids concentration, flocculation conditions, operating conditions, etc. Please contact us for detailed specifications and model selection.

Detailed specifications table for all 16 models including dimensions, weight, motor, and cleaning conditions
modelDS ability
At low concentration
kg-DS/h
DS ability
At high concentration
kg-DS/h
screw standardExternal dimensions L×W×H
mm
Net weight
kg
operating weight
kg
screw motor
kW×Number of units
Stirrer Motor
kW×Number of units
total power
kW
Cleaning water amount
L/h
Washing water pressure
kg/cm²
Guidelines for daily maintenanceDetails/Consultation
NTD131510DN130×11801,778×892×1,1602503950.18×10.18×10.3643>210 min/dayConsultation
NTD1321020DN130×11801,920×970×1,2203505950.18×20.18×10.5486>210 min/dayConsultation
NTD2511530DN250×17602,550×880×1,5505008050.55×10.37×10.9258>210 min/dayConsultation
NTD2523060DN250×17602,670×1,095×1,5508001,3200.55×20.37×11.47116>210 min/dayConsultation
NTD3013060DN300×22203,140×1,000×1,6107501,2750.75×10.55×11.3093>210 min/dayConsultation
NTD30260120DN300×22203,280×1,295×1,6101,3402,2250.75×20.55×12.05186>210 min/dayConsultation
NTD30390180DN300×22203,501×1,640×1,6901,7503,0300.75×30.75×13.00279>210 min/dayConsultation
NTD304120240DN300×22203,840×2,045×1,7302,1504,1500.75×40.75×13.75372>210 min/dayConsultation
NTD35150100DN350×24803,520×1,065×1,8301,1501,9151.1×10.75×11.85126>210 min/dayConsultation
NTD352100200DN350×24803,720×1,395×1,8301,9503,2051.1×20.75×12.95252>210 min/dayConsultation
NTD353150300DN350×24804,040×1,770×1,8752,8004,8301.1×31.1×14.40378>210 min/dayConsultation
NTD354200400DN350×24804,240×2,230×1,8803,7006,5151.1×41.5×15.90504>210 min/dayConsultation
NTD40180160DN400×31004,470×1,225×2,2252,0503,4251.5×11.5×13.00115>210 min/dayConsultation
NTD402160320DN400×31004,820×1,680×2,2503,8506,6451.5×21.5×14.50230>210 min/dayConsultation
NTD403240480DN400×31004,720×2,515×2,2305,4009,7101.5×31.5×27.50345>210 min/dayConsultation
NTD404320640DN400×31004,760×3,120×2,2307,00012,9601.5×41.5×29.00460>210 min/dayConsultation

Washing water pressure is over 2 kg/cm², and daily maintenance is approximately 10 minutes/day. Processing capacity, power, cleaning conditions, and time required for maintenance vary depending on sludge properties, solids concentration, chemical injection, and operating conditions.

Specification Table Terminology

DS
Dry Solids. Dry Solids amount.
kg-DS/h
1 Dry Solids processing amount per hour.
m³/h
1 Sludge supply volume per hour.
mg/L
Solids concentration per unit volume.
After dewatering Moisture Content
Mass percentage of water contained in dehydrated cake.

1 m³ = 1,000 L; 1,000 mg/L = 1 kg/m³. Converting to a percentage concentration requires an assumed density.

APPLICATIONS

Main application fields and dewatering reference data

Dewatering of sewage/community wastewater, food/drinks, dairy industry, livestock/fisheries processing, pharmaceuticals, DAF sludge containing oils and fats, textiles/dyeing, paper manufacturing, chemicals, river/dredging sludge, etc. can be considered. Compatibility with individual sludges is confirmed by testing.

Type of sludgesupply DS (reference)After dewatering Moisture Content (reference)
Urban sewage sludge1.3%About 82%
Pharmaceutical sludge1.3%About 76%
Food sludge1.3~1.4%About 81~82%
Palm oil sludge4.0%Approximately 80%

The above is reference data showing the dewatering status of each sludge. It does not indicate delivery results for individual projects or guaranteed values ​​for moisture content. Results vary depending on sludge properties and treatment conditions.

MODEL SELECTION

Consider candidate models based on DS load

Calculate the DS load per hour by inputting the feed amount and solids concentration. The results are a reference comparison with the specification table and do not guarantee the compatibility or performance of the model.

Enter the numerical value and press "Calculate reference candidates".

DS load (kg-DS/h) = feed flow (m³/h) × solids concentration (kg-DS/m³). For daily inputs, divide volume by operating hours to obtain hourly flow. Published feed-flow ratings are compared only when the concentration exactly matches one of the four listed values; other concentrations are not interpolated. Final selection requires a review of sludge characteristics, chemical dosing, peak load, design margin, installation conditions and tests with the actual sludge.

introduction

Inform the conditions and provide technical consultation

CONFIGURATION

Items to check for equipment configuration

Below is an example of equipment configuration consideration. The standard scope of delivery, peripheral equipment, and changeable specifications will be explained to you individually at the time of consultation.

basic configuration example

dewatering unit, coagulation mixing tank, filtrate receiver, control panel, cleaning mechanism

peripheral equipment example

Sludge supply pump, chemical feeding device, Polymer Flocculant dissolving device, dewatered cake conveying equipment

Consultation example for changes/additions

Material change, odor-proof cover, touch panel, remote monitoring, enhanced cleaning mechanism

The required configuration varies depending on the application and operating conditions. Please check the standard accessories and additional specifications for each model at the time of consultation.

PRODUCT MATERIALS

About product documentation

The main specifications of all 16 models are listed. If you require drawings or detailed configuration data, please contact us with the model you are considering and the conditions of use.

Inquire about product documentation

FAQ

multi-disc screw press dewatering unit FAQ

What is kg-DS/h?

1 Amount of dry Solids processed per hour. DS stands for Dry Solids.

What is the difference between sludge supply flow rate and DS processing capacity?

Supply flow rate is the volume of sludge (m³/h), and DS processing capacity is the mass of Solids (kg-DS/h). Calculate the DS load from the supply flow rate and solids concentration.

What if I don't know the solid content concentration?

Please check the actual measurement values ​​and analysis results. The model cannot be determined without knowing the concentration.

How much is Moisture Content after dewatering?

Dewatering reference data is approximately 82% for urban sewage sludge, approximately 76% for pharmaceutical sludge, approximately 81~82% for food sludge, and approximately 80% for palm oil sludge. This is not a guaranteed value.

Can sludge containing oil be treated?

DAF sludge containing oil and fat is also considered. Compatibility with individual sludges is confirmed using actual sludge and chemical injection conditions.

Can I plan to drive 24 hours a day?

Compatible with automatic driving. This does not mean that 24-hour non-stop operation is guaranteed. Check the conditions of cleaning, maintenance, sludge supply, and peripheral equipment.

Is a flocculant necessary?

processing process includes coagulation mixing. The type and amount of chemicals to be injected will be determined based on sludge tests and operating conditions.

How should I choose the model?

Calculate the DS load from the flow rate and solids concentration and compare it with the reference specifications. The final selection will be made based on the classification of low concentration and high concentration and the results of actual sludge tests.

What is required when updating equipment?

Check the existing drawings, installation dimensions, delivery route, power supply, water supply/drainage, chemical injection, and cake transportation conditions.

In what cases is actual sludge testing necessary?

Please contact us for confirmation using actual sludge when the target Moisture Content and processing capacity are determined, sludge with oil content or properties is unique, or chemical injection conditions are not yet determined.

How much cleaning water do I need?

The approximate amount of washing water is 43 to 504 L/h depending on the model, and the supply water pressure is over 2 kg/cm². The water amount is a reference value during cleaning operation.

What is the difference from a belt press dewatering unit?

belt press uses belts to sandwich sludge, while this product uses laminated rings and screws to concentrate and compress sludge. Compare the sludge properties and installation conditions.

CONTACT

NTD series quotation and technical consultation

Please let us know the type of sludge, flow rate, solid content concentration, operating time, and installation conditions. If you select a model and proceed, the model name will be carried over to the inquiry content.

Contact Us
← Return to product list